Richell Pet Stuff Tower User Manual

Parts / Materials
Please check parts before assembling.
Insert side panels into the grooves
of the middle panel as shown,
making sure the holes are positioned
on the top of the side panels.
Place containers, aligned with
rectangular holes of the middle and
base panels, into each compartment.
Please set the hook at an easy-to-use
position on the tower
.
Insert side panels to the the base
as shown.
Insert middle panel to the side
panels as shown.
Middle panel has a rectangular hole.
Left-side panel and right-side panel are different.
Each side panel has a top and bottom: make sure
the hole for the hook is positioned on top of the
side panel as shown.
NOTE : NOTE :
Thank you for choosing Richell's Pet Stuf
f Tower. Please read
this instruction manual carefully before assembling or using this
product. Keep this manual for future reference.
Instruction Manual
How to Assemble
Warnings!
Parts cannot be disassembled once they are snapped together.
To prevent overturning, do not hang heavy contents on side hooks
( Maximum hanging load is 4.4lbs per hook).
To prevent overturning, place heavier contents in bottom container
( Maximum load capacity of bottom container is 8.8lbs).
Do not step on the foot pedal too hard, as it may cause damage to
the main body.
Place the tower on a flat, even surface.
Do not use hooks to move the tower from one location to another.
Important
NOTE :
Make sure pieces are snapped together properly.
How to attach the lid
0804
2100 N. Hwy. 360, Suite 1700, Grand Prairie, TX 75050
Phone (972) 641-9795 Fax (972) 641-8495
www.richellusa.com
Insert top panel to the side panels
as shown.
SIZE :
W16.7" x D12.8" x H34.1"
( with hooks )
660004-REV
Pet Stuff Tower
TM
�
Snap lid into place at positions (3) shown on
the container below:
Material : polypropylene
R
�
�
Made in the USA
Richell USA Inc.
Lid
Container
Hook
Rectanglar hole
Container
Top Panel
front
back
Pedal
(pre-assembled)
Base
Left-side Panel
Right-side Panel
Hole for the hook
Back
Middle Panel
front
Back
Left-side Panel
Right-side Panel
front
Hook ( 2 ) Lid ( 2 )
Middle Panel ( 1 )
Top Panel ( 1 )
Container (2)
Base / Pedal ( 1 set )
Right Panel ( 2 )
Left Panel ( 2 )

Richell Pet Stuff Tower Specifications

General

Brand	Richell
Model	Pet Stuff Tower
Category	Pet Care Product
Language	English

Summary

Product Overview and Safety Information

Important Usage Warnings

Key precautions for safe assembly and use, including weight limits and placement.

Parts and Materials

Included Components

Lists all parts included in the Pet Stuff Tower kit with quantities and material.

Assembly Instructions

Step 1: Attach Side Panels to Base

First step involves inserting side panels into the base, noting panel orientation.

Step 2: Insert Middle Panel

Connect the middle panel to the assembled side panels.

Step 3: Secure Side Panels to Middle Panel

Insert side panels into grooves of the middle panel, aligning hook holes.

Step 4: Attach Top Panel

Connect the top panel to the side panels.

Step 5: Insert Containers

Place containers into compartments, aligned with base and middle panel holes.

How to Attach the Lid

Instructions for snapping the lid onto the assembled container.

Manufacturer Information

Richell USA Contact Details

Company address, phone, fax, and website for Richell USA Inc.