Richway Bio-Mat 7000 MX User Manual (English)

To Next Page

DO NOT SLEEP ALL NIGHT USING A HIGH TEMPERATURE

THERAPEUTIC RECOMMANDATIONS

Insert White Connector from Controller

Biomat

(QUEEN SIZE : L L / R R)

Insert electrical plug from controller into a

wall outlet electrical socket.

Turn on the Control Box Safety Switch by

pressing the button located on the right side of

the unit.

Press Power Button to Activate the Biomat

you followed the above steps and the power is

still not on, repeat steps 1~4 again.

Temperature Up / Down

Sets the desired temperature of the

Biomat

You will see the light move up or down on the

indicator as you press the button.

TIMER :

Selects the length of time you want to use

the

Biomat

. The light will change to a

different time setting as you press the Time

Button on the indicator.

EMI(Elecrtomagnetic Interception) :

Blocks harmful Elecrtomagnetic and Water

Vein Waves that would otherwise emit from

the

Biomat

This light will come and stays on.

TEMPERATURE INDICATOR :

This light will come on and stays on as you

change the temperature control.

ALARM :

This light will appear if there is any

malfunction. Please contact the dealer.

Children, diabetics, invalids or paralyzed persons should be monitored at all times while mat is in use.

Never use high heat temperatures on children, or those who are pregnant or lactating. Avoid any heat

on infants.

Use a high temperature of

(

F 140¡-158¡ / C 65¡- 70¡

)

for only 20~60minutes per-day to relieve arthritis

pain and stress or for a relaxing sauna/detoxification.

Use a low setting of

(

F 95¡-113¡/ C 35¡- 45¡

)

for a good nights sleep, or use no heat(power on only) for

cool refreshing negative ions.

GENERAL

INSTRUCTIONS FOR THE

BI0MAT

Need help?

Do you have a question about the Richway Bio-Mat 7000 MX and is the answer not in the manual?

Richway Bio-Mat 7000 MX Specifications

General

Manufacturer	Richway
Product Name	Bio-Mat 7000 MX
Category	Massager
Power Consumption	180W
Negative Ion Emission	Yes
Material	Amethyst, Tourmaline
Heating Method	Far Infrared
Temperature Range	Approx. 30°C to 70°C (86°F to 158°F)
Timer	Up to 12 hours
Power Supply	AC 120V, 60Hz
Controller	Digital controller
Temperature Settings	9 levels