Ricoh GX7000 - Color Inkjet Printer

PAGE 5 of 12 >>
SubliJet - R: Ricoh GX7000 — Mac OS-X — ICC Profile
Setup and Print Guide — Illustrator CS~CS5 (Continued; Page 5:12)
B. Click the drop-down arrow and select sg_GX7000_IQr_RGB_v2
A. Click the drop-down arrow and select Color Handling: Let Illustrator determine colors
C. Click the drop-down arrow and select Rendering Intent: Perceptual
4.) Match your settings to the ones shown below: (see FIGURE 7)
FIGURE 7
B
A
C
ED
D. When the correct settings have been entered, click Page Setup (see FIGURE 7). This will open
the Page Setup window (see FIGURE 8). Select the GelSprinter GX7000, adjust the paper size
according to the transfer paper size being used and click OK. Clicking OK will return you to the
print window (see FIGURE 7).
E. Click Printer... to continue (see FIGURE 7).
FIGURE 8
1
2
3
17.