Need help?Do you have a question about the Ricoh G108 and is the answer not in the manual?
General| Duplex Printing | Yes |
|---|---|
| Print Resolution | 1200 x 1200 dpi |
| Paper Capacity | 250 sheets |
| Network Connectivity | Ethernet |
| Supported Operating Systems | Windows, Mac, Linux |
Specifies the environmental, level, space, and power requirements for printer installation.
Details the steps for installing the printer and necessary settings for service contracts.
Provides instructions and precautions for safely moving the printer.
Lists components requiring maintenance based on page count and user actions.
Details maintenance tasks for components based on page count and necessary settings.
Instructions for removing and replacing the printer's external covers.
Details on the optics unit, including caution decals and removal procedures.
Procedures for replacing the OPC belt unit, sensor, and related components.
Procedures for replacing toner end sensors and development unit sensors/clutches.
Procedures for replacing the transfer belt unit, sensors, and cleaning components.
Procedures for replacing waste toner bottles and holders.
Procedures for replacing paper feed rollers, separator pads, and sensors.
Procedures for replacing transfer roller units and paper exit sensors.
Procedures for replacing the fusing unit and its components like the fusing lamp.
Procedures for replacing the controller, I/O device, DC, and high voltage units.
Procedures for replacing main and development motor drive path components.
Procedures for replacing optics unit, PSU, and fusing fans.
Procedures for replacing front cover and top/rear cover interlock switches.
Procedures for adjusting leading edge and side-to-side paper registration.
Summary of service call classes, definitions, and reset procedures.
Classification of SC codes used across different machine models.
Table listing SC codes, their class, error, and possible causes.
Troubleshooting common image quality issues like background, missing image, and banding.
Troubleshooting common issues related to sensors, fuses, and LEDs.
Troubleshooting information specific to the optional duplex unit.
Instructions for operating, selecting, and quitting service program mode.
Details on service SPs, tables for bit switches, and printer gamma adjustment.
Details on engine-related SPs for feed, drum, and mode settings.
Procedures for updating firmware, handling SD cards, and NVRAM data.
Procedures for moving application programs between SD cards.
Information on controller self-diagnostics including power-on and detailed checks.
Details on TMA control, switches, and development bias adjustment.
Instructions for accessing and navigating the user program mode.
Information on DIP switches located on the controller board.
Provides component layout, paper path, drive layout, and board layout diagrams.
Details the TMA control process including sensor calibration and bias adjustment.
Details the optical path, laser synchronization, specifications, and safety switches.
Details on the OPC belt, its drive, cleaning, sensors, and quenching.
Details on the development unit's overview, sensors, drive, and bias.
Details on the transfer belt's drive, sensors, cleaning, and waste toner collection.
Details on paper tray overview, lift, feed, size detection, and sensors.
Details on paper registration and the paper transfer process.
Details on the fusing unit's overview, drive, pressure, process, and temperature control.
Details on the paper exit unit's drive and sensors.
Details on the controller overview, board layout, functions, and network protection.
Details on the Ethernet board layout and its interface.
General features, plug and play, hot plugging, and connectors for USB 2.0.
Specifications, modes, security features, and troubleshooting for wireless LAN.
Specifications, block diagram, communication, and security features for Bluetooth.
Provides key specifications like print speed, resolution, interfaces, and paper capacity.
Lists supported paper sizes for various units and regions.
Details supported printer drivers and utility software.
Lists the printer's units, EDP codes, diagrams, and remarks.
Specifications for optional paper tray, legal paper tray, and duplex units.
Safety precautions to be taken before performing replacement procedures.
Explanation of symbols used throughout the manual.
Procedures for replacing exterior covers, feed rollers, separator pads, and sensors.
Detailed explanations of paper size detection, paper lift, paper feed, and end detection.
Procedures for replacing exterior covers, paper guides, rollers, sensors, and switches.
Details component layout, paper path, drive layout, duplex process, and safety switches.
Troubleshooting common issues like loose connections and paper jams.
To Next Page