Ricoh G108 - Troubleshooting

IEEE 802.11B (WIRELESS LAN)
SM 6-57 G108
Detailed
Descriptions
6.14.4 TROUBLESHOOTING
Communication Status
You can check the communication status from the menu item “W.LAN Signal” in
the Maintenance menu. You can also use the Web Device Monitor or Telnet. The
status is described on a numbered scale of from 0 to 100.
Status Display Communication Status
Good 76 ~ 100
Fair 41 ~ 75
Poor 21 ~ 40
Unavailable 0 ~ 20
NOTE: The communication status is checked only when the infrastructure mode is
used.
Channel Settings
If a communication error is caused by electrical noises or interference by other
electrical devices, you may have to change the channel settings.
To avoid interference with neighboring channels, it is recommended that you
change the channel by three. For example, if channel 11 (default) is currently used,
try using channel 8.
12345678910 11 12 13 Channel
MHz 2,412 2,437 2,462
25MHz 25MHz
G108D967.WMF