OPC BELT
G108 6-16 SM
6.4.3 CHARGE ROLLER AND CLEANING ROLLER
The charge roller [C] induces a negative charge on to the OPC belt. The cleaning
roller [D] cleans the charge roller. The high voltage unit (HVU) provides an
electrical bias to the charge roller and the cleaning roller. The left end of the charge
roller is attached to the BRV [B] terminal on the HVU. The left end of the cleaning
roller is attached to CLV [A] terminal on the HVU.
G108D926.WMF
[A]
[B]
[C]
[D]
To Next Page
Loading...
