Ricoh G108 - Drive; Overview; Waste-Toner Collection Unit

TRANSFER BELT
SM 6-29 G108
Detailed
Descriptions
6.6.4 WASTE-TONER COLLECTION UNIT
Overview
The waste-toner collection unit is located below the right end of the transfer belt
unit. The waste toner feeders in the OPC belt unit ( 6.4.2) and in the transfer-belt
cleaning unit move waste toner to the waste-toner collection unit. The waste-toner
collection unit moves waste toner to the waste toner bottle [D] via the waste toner
path [G]. The waste toner path incorporates a collection coil to prevent waste toner
blockage.
Drive
The main motor drives the gear [F] located on the right end of the waste-toner
collection unit via idle gears. The drive power is transferred to the collection coil via
the gears [E] located on the left end of the unit.
NOTE: The gear [F] on the right end also routes drive power to the OPC-belt
charge roller ( 6.4.1).
G108D933.WMF
[A]
[B]
[C]
[D]
[F]
[G]
[E]