USER PROGRAM MODE
SM 5-51 G108
Service
Tables
5.6 USER PROGRAM MODE
Starting User Program
1. Press the Menu key to enter the user program mode.
2. Use the up arrow key and the down arrow key to locate the program desired.
3. Press the Enter key to open or set the program.
NOTE: Push the Escape key once or several times to go back to step 1.
Quitting User Program
Push the Online key or press the Escape key several times until the message
"Ready" is displayed.
Menu List
For more information, print the Menu List (Menu > List/Test Print > Menu List >
Enter Key).
Sample Print Maintenance PCL Menu
• Sample Print • Color Calibrate • Orientation
• Error File(s)
• Key Repeat • Form Lines
• Registration • Font Source
Locked Print
• Plain Paper Type • Font Number
• Locked Print • Thick Paper Type • Point Size
• Error File(s) • A5/HLT Size • Font Pitch
• Maintenance Reset • Symbol Set
Paper Input
• 4C. Graphic Mode • Courier Font
• Tray Paper Size
• Ext. A4 Width
• Paper Type
System
• Append CR to LF
• Tray Locking • Print Error Report • Resolution
• Tray Priority • Auto Continue
• Memory Overflow
PS Menu
List/Test Print
• Copies • Data Format
• Config. Page/Error Log • Printer Language • Resolution
• Config. Page • Sub Paper Size • Color Setting
• Error Log • Page Size • Color Profile
• Menu List • Def. Printer Language
• Color Demo Page • Energy Saver 1
PDF Menu
• PCL Config. Page • Energy Saver 2 • PDF: Change PW
• PS Config. Page • Unit of Measure • Resolution
• PDF Config. Page • Letterhead Mode • Color Setting
• Hex Dump • RAM Disk • Color Profile
• Operations Test • Notify by Email
Language
Host Interface
• I/O Buffer
• I/O Timeout
• Network Setup
To Next Page
Loading...
