USER MAINTENANCE
2. PREVENTIVE MAINTENANCE
2.1 USER MAINTENANCE
Page Count
This table lists the components that require maintenance when the printer has
output a specific number of printed pages.
Preventive
maintenance
Key: C: Clean, R: Replace, L: Lubricate, I: Inspect, KP = 1,000 prints
Component 3.7KP 13.2KP EM Remarks
Registration roller C
Waste toner bottle R NOTE 1)
OPC belt unit R NOTE 1), 2)
Component 47KP 90KP 120KP Remarks
Fusing unit R NOTE 1), 2)
NOTE:
1) The component’s usable life is determined by the number of
developments. The values in the table above are calculated under the
following conditions:
A4/LT SEF, 5% image coverage ratio, two
pages per job, 50% color ratio (number of cycles is also considered in
this formula). NOTE: The values here are the maintenance yields for
these parts based upon the conditions above. Any differing part yields
for these items are based upon different formulas (conditions).
2) When replacing the OPC belt unit or Fusing unit, the user executes the
following mode: Menu > Maintenance > Maint. Reset > PCU (or >
Fusing Unit). This mode and SP7-905-001 (PM Parts Clear, OPC Belt)
have the same function.
SM 2-1 G108
To Next Page
Loading...
