BLUETOOTH
SM 6-61 G108
Detailed
Descriptions
Profiles
Bluetooth Profiles are general behaviors through which Bluetooth units
communicate with other units. Bluetooth profiles specify basic functionality in a way
that makes it easy for users to determine, for example, whether they can
synchronize the phone lists between two devices (Synchronization Profile), transfer
objects between devices (Object Push Profile), or access a LAN (LAN Access
Profile). Two Bluetooth devices will not communicate together if they don’t share
the required behaviors (i.e. protocols). There are many types of Bluetooth Profiles
and associated service protocols (behaviors). Here are 14 common Bluetooth
profiles.
• Generic Access Profile
• Service Discovery Profile
• Cordless Telephony Profile
• Intercom Profile
• Serial Port Profile
• Headset Profile
• Dial-up Networking Profile
• Fax Profile
• LAN Access Profile
• Generic Object Exchange Profile
• Object Push Profile
• File Transfer Profile
• Synchronization Profile
• Hardcopy Cable Replacement Profile
• Basic Imaging Profile
The Serial Port Profile (SPP) and the Hardcopy Cable Replacement Profile (HCRP)
are used for printers. SPP is used in place of the serial port while HCRP is used in
place of the parallel port.
This machine requires Adobe PostScript3 to use the Basic Imaging Profile (BIP)
Adobe PostScript3 is standard.
6.15.4 SECURITY FEATURES
Public and Private Mode
Computers can browse through nodes. They can find the nodes only when the
nodes are in the public mode. When a node is in the private mode, computers
cannot find the nodes. The printer is in public mode by default.
PIN Code (Personal Identification Number)
A computer can communicate with a node when the node sends the PIN code. PIN
codes are 4-digit numbers. The G108 uses the last four digits of its serial number
as the PIN code. You cannot change the PIN code.
To Next Page
Loading...
