Ricoh G108 - Telephone Number Setting (Sp5-812)

SERVICE PROGRAM MODE
SM 5-37 G108
Service
Tables
5.1.5 TELEPHONE NUMBER SETTING (SP5-812)
Do this to set telephone numbers:
1. Enter SP mode.
2. Select Engine SP5-812-1 (Service) or
2 (FAX TEL No.) by pressing the
Enter key.
3. Press the Enter key. A cursor is
shown on the bottom-left corner.
4. To select a column, press the enter
key [D]. A character is shown in the
column.
5. To change the character, press the
up-arrow key or the down-arrow key.
The characters change as follows:
1) Numbers ("0" to "9")
2) Uppercase letters ("A" to "Z")
3) Hyphen
4) Period
6. To select the character, with the character displayed, press the Enter key.
7. To move the cursor, push the up-arrow key [B] or the down-arrow key [C].
8. Set all necessary characters.
9. To quit the program, press the Escape key [A].
G108S901.WMF
[B]
Online Menu
Job Reset Esca
p
e
Form Feed #Ente
r
[D]
[A]
[C]
Powe
r
 Alert Data In