Ricoh G108 - Stopper

STOPPER
G390 12 SM
1.10 STOPPER
1. Make sure that the screws [A] inside the rear paper guide [B] are correctly
attached.
NOTE: The duplex unit is unstable and unsafe if these screws are not correctly
attached.
2. Release the bolt [C] from the printer.
NOTE: The screw will not come off the stopper.
3. Stopper [D] (Bolt x 1)
G390R916.WMF
G390R915.WMF
[A]
[B]
[C]
[D]