Ricoh G108 - Side-To-Side Registration

REGISTRATION
SM 3-31 G108
Replacement
and
Adjustment
3.14.2 SIDE-TO-SIDE REGISTRATION
Default
±0.0 mm
Maximum +3.5 mm
Minimum -3.5 mm
Step 0.5 mm
Engine SP1-002 (S-to-S Reg.) adjusts the margin
on the left edge. When you specify a greater
value, the left margin becomes wider. Specify the
value for each tray and the duplex unit:
• Engine SP1-002-001: Tray 1 (Standard paper tray)
• Engine SP1-002-002: Tray 2 (Optional paper feed unit)
• Engine SP1-002-003: Duplex (Optional duplex unit)
NOTE: The diagrams below illustrate examples of adjustment results. Actual
results may be different from these examples.
-3.5 mm
+3.5 mm
±
0.0 mm
G108R953.WMF
G108R952.WMF
G108R949.WMF