Ricoh G108 - PAPER TRANSFER AND PAPER EXIT

PAPER TRANSFER AND PAPER EXIT
3.8 PAPER TRANSFER AND PAPER EXIT
3.8.1 TRANSFER ROLLER UNIT
1. Open the rear cover.
G108R935.WMF
[B]
2. Grasp the left and right levers
[A][B] and pull them frontward
until the upper half of the
transfer roller unit comes out.
3. Transfer roller unit
Necessary Setting
After replacing the transfer roller
unit, execute SP7-905-004 (PM
Parts Clear, Transfer Roller).
[A]
3.8.2 PAPER EXIT SENSOR AND PAPER OVERFLOW SENSOR
1. Open the rear cover [A].
G108R921.WMF
[D]
[C]
[B]
[A]
2. Paper exit unit [B] ( x 4)
3. Paper exit sensor [C]
4. Paper overflow sensor [D]
G108 3-16 SM