Ricoh G108 - Pin Assignment; Related SP Mode; Remarks

USB 2.0
SM 6-53 G108
Detailed
Descriptions
6.13.3 PIN ASSIGNMENT
This machine uses the Type B connector.
The table below lists the pin-out and function of each pin.
Pin Signal Description Wiring Assignment
1 Power Red
2 Data – White
3 Data + Green
4 Power GND White
6.13.4 REMARKS
This machine does not generate any report that details any USB operations.
If you should need to replace the controller, the host computer (of the machine) will
not recognize the printer (now with the replaced controller) as the same peripheral
device. It will be necessary to reload the printer’s drivers.
Related SP Mode
Transfer Rate (SP5-844-001) adjusts the transfer rate of the USB port. You can
specify Auto Change or Full Speed (12 Mbps). If Auto Change frequently causes
transfer errors, you should try specifying Full Speed as a possible solution to this
issue.
G108D952.WMF
2
3
1
4