EXTERIOR COVER
SM 1 G390
G390
Duplex Unit
1. REPLACEMENT AND ADJUSTMENT
CAUTION
Turn off the main power switch and disconnect all cabling, including the
A.C. cord, from the printer before you remove any parts.
Keys:
: See or refer to : Screw : Connector
: Clip ring : E ring
1.1 EXTERIOR COVER
1. Duplex unit (from the
printer)
2. Left cover [A] ( x 2)
Reassembling
Make sure that the stopper [B]
is in the correct position before
you fasten the screw.
3. Right cover [C] ( x 2)
G390R901.WMF
G390R902.WMF
[A]
[C]
[B]
To Next Page
Loading...
