Ricoh LD220F - Page 96

To Next Page

To Previous Page

• telnet: Can be used for specifying the setting.

[Network] [Domain Name] [Specify] "Domain Name"

• Web Image Monitor: Can be used for specifying the setting.

• SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.

• telnet: Can be used for specifying the setting.

[Network] [WINS Configuration] [On] "Primary WINS Server"

• Web Image Monitor: Can be used for specifying the setting.

• SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.

• telnet: Can be used for specifying the setting.

[Network] [WINS Configuration] [On] "Second. WINS Server"

• Web Image Monitor: Can be used for specifying the setting.

• SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.

• telnet: Can be used for specifying the setting.

[Network] [WINS Configuration] [On] "Scope ID"

• Web Image Monitor: Can be used for specifying the setting.

• SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.

• telnet: Can be used for specifying the setting.

[Network] [WINS Configuration] [Off]

• Web Image Monitor: Can be used for specifying the setting.

• SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.

• telnet: Can be used for specifying the setting.

[Network] [Effective Protocol] "IPv4"

• Web Image Monitor: Can be used for specifying the setting.

• SmartDeviceMonitor for Admin: You can specify the TCP/IP settings if SmartDeviceMonitor for

Admin is communicating with the machine using IPX/SPX.

• telnet: Can be used for specifying the setting.

[Network] [Effective Protocol] "IPv6"

• Web Image Monitor: Can be used for specifying the setting.

• SmartDeviceMonitor for Admin: Cannot be used for specifying the setting.

• telnet: Can be used for specifying the setting.

[Network] [Effective Protocol] "NetWare"

• Web Image Monitor: Can be used for specifying the setting.

• SmartDeviceMonitor for Admin: You can specify the IPX/SPX settings if SmartDeviceMonitor for

Admin is communicating with the machine using TCP/IP.

2. Connecting the Machine

Related product manuals