Why do black lines or stains appear on prints from my Ricoh All in One Printer?
Black lines or stains may appear on prints from your Ricoh All in One Printer if there is no margin or a solid image area near the leading edge of the original. To resolve this, create a margin of at least 5 mm (0.2 inches) at the leading edge. Also, inspect the document feeder and clean it if you notice any dirt.
What to do if I get white or incomplete prints from my Ricoh All in One Printer?
If you are getting white or incomplete prints from your Ricoh All in One Printer, pull out the drum unit. Remove the master from the drum and any paper that is stuck to the drum. Then, re-insert the drum unit until it locks in position, and lower the drum unit lock lever.
What to do if a paper misfeed occurs in the paper feed section of my Ricoh All in One Printer?
If a paper misfeed occurs in the paper feed section of your Ricoh All in One Printer, lower the paper feed tray adjustment lever and slowly but firmly pull out the paper.
What to do if a paper misfeed occurs in the paper delivery section of my Ricoh All in One Printer?
If a paper misfeed occurs in the paper delivery section of your Ricoh All in One Printer, remove the misfed paper.
What to do if the master or paper is wrapped around the drum, or a paper misfeed occurs inside my Ricoh All in One Printer?
If the master or paper is wrapped around the drum, or if a paper misfeed occurs inside your Ricoh All in One Printer, pull out the drum unit and remove the misfed paper.
What to do if a master misfeed occurs in the master eject section of my Ricoh All in One Printer?
If a master misfeed occurs in the master eject section of your Ricoh All in One Printer, pull out the master eject box. Remove the misfed master and return the master eject box to its original position.
How to resolve original misfeed in the document feeder of my Ricoh All in One Printer?
To resolve an original misfeed in the document feeder of your Ricoh All in One Printer, open the cover of the document feeder. Gently pull out the original, and then close the cover of the document feeder.
What to do if the misfeed indicator light is on with other lights on Ricoh Copier?
If the misfeed indicator lights up along with other indicators on your Ricoh Copier, and misfeeds occur repeatedly, it is recommended to contact your service representative for assistance.
How to fix dirt on the back side of paper from my Ricoh All in One Printer?
If you notice dirt on the back side of paper from your Ricoh All in One Printer, especially when using paper smaller than the original, ensure you've selected the correct reduction ratio. Then, turn off the main switch, pull out the drum unit, and clean the pressure roller with a clean cloth. Also, use a clean cloth to remove any ink accumulated on the trailing edge of the drum unit.
General| Brand | Ricoh |
|---|---|
| Model | LDD745 |
| Category | All in One Printer |
| Language | English |
To Next Page
