Ricoh LDD745 - Auto Cycle-Processing a Master and Making Prints in One Step

Auto Cycle—Processing a Master and Making Prints in One Step
29
1
Auto Cycle—Processing a Master and
Making Prints in One Step
Use the {Auto Cycle} key to process
masters and make prints in one step.
A Place the original in the docu-
ment feeder.
B Press the {Auto Cycle} key.
C Enter the number of prints re-
quired with the number keys.
D Press the {Master Making} key.
C2748608_Titanium3-EN.book Page 29 Wednesday, November 19, 2008 10:25 AM