Operation
30
1
Combine—Combining Two Originals onto
One Print
You can print two separate originals
on a single sheet of paper. The follow-
ing diagrams show the available pa-
per lists and orientations.
1: B5 JISK, A5K, B6 JISK or A6K.
2: B5 JISK, A5K, B6 JISK or A6K.
3: B4 JISL, A4L, B5 JISL or A5L.
Note
❒ The following tables list the repro-
duction ratios used.
❖ Metric version
*1
For a reduction ratio of 71%, use
the
{
Reduce/Enlarge
}
key to select
“B4VB5”.
*2
For a reduction ratio of 82%, use
the {Reduce/Enlarge} key to select
“B4VA4 B5VA5”.
*3
For a reduction ratio of 87%, use
the {Reduce/Enlarge} key to select
“A4VB5”.
*4
For an enlargement ratio of 115%,
use the {Reduce/Enlarge} key to se-
lect “B5VA4”.
*5
For an enlargement ratio of 122%,
use the {Reduce/Enlarge} key to se-
lect “A4VB4 A5VB5”.
*6
For an enlargement ratio of 141%,
use the {Reduce/Enlarge} key to se-
lect “B5VB4”.
❖ Inch version
*1
For a reduction ratio of 65%, use
the {Reduce/Enlarge} key to select
“11" × 17"V8
1
/
2
" × 11" “.
❒ If the master length of the first origi-
nal is longer than 243 mm, 9.5" or
shorter than 70 mm, 2.8", Combine
mode is disabled.
❒ Any image closer than 5 mm, 0.2"
to the leading edge of an original
will not be printed. When the im-
age is too close to the leading edge,
use copies of the originals with the
image shifted at least 5 mm, 0.2"
from the leading edge.
❒ You can select different image set-
tings for the first and second origi-
nal.
❒ Make sure that the paper feed side
plates touch the paper lightly
when using the Combine function.
If they do not, the two original im-
ages will not appear at the proper
position on the prints.
Original Size
B5 JIS
K
A5
K
B6 JIS
K
A6
K
Paper Size
B4 JIS
L
100% 122%
*5
141%
*6
--
A4
L
82%
*2
100% 115%
*4
141%
*6
B5 JIS
L
71%
*1
87%
*3
100% 122%
*5
A5
L
-- 71%
*1
82%
*2
100%
ZCTX010E
BA AB
12 3
Original Size
5
1
/
2
" × 8
1
/
2
"K
Paper
Size
8
1
/
2
" × 11"
L
100%
5
1
/
2
"
×
8
1
/
2
"
L
65%
*1
C2748608_Titanium3-EN.book Page 30 Wednesday, November 19, 2008 10:25 AM