Printing on Different Types of Paper Thickness
27
1
Separation Pressure Lever
A To prevent double-feed, adjust
the paper separation pressure us-
ing the separation pressure lever.
Note
❒ Paper separation pressure can
be adjusted according to the pa-
per weights as shown in the fol-
lowing table.
*1
This position can also be used if
the leading edge of the paper is
curled, or when the paper does
not feed properly.
Posi-
tion
Metric
version
Inch
version
1 Use this position if the lead-
ing edge of the paper is
curled, or when the paper
does not feed properly at Po-
sition 2.
2
*1
35–47.0
g/m
2
,
81.6–127.9
g/m
2
9.3 – 12.5 lb.,
21.7–34.0 lb.
3 47.1–81.5
g/m
2
12.6–21.6 lb.
4 Use this position when a
double-feed occurs.
5 Use this position if double-
feeds persist even after the
lever has been shifted to Po-
sition 4.
C2748608_Titanium3-EN.book Page 27 Wednesday, November 19, 2008 10:25 AM
To Next Page
Loading...
