To set the International TX Mode
This section describes how to set the International TX Mode.
1. Press [Option].
2. Select [International TX Mode] using [ ] or [ ], and then press the [OK] key.
3. Select [On] or [Off] using [ ] or [ ], and then press the [OK] key.
4. Press [Exit].
To set label insertion
This section describes how to set label insertion.
When Label Insertion is set to ON, the receiver's name is printed on the fax message when it is received
at the other end.
1. Press [Option].
5. Registering Addresses and Users for Facsimile/Scanner Functions
260
To Next Page
Loading...
