Ricoh LD220SPF

22. Enter the path, and then press the [OK] key.
You can also enter an IPv4 address.
23. Press [Com.Test] to check the path is set correctly.
24. Press [Exit].
25. Press the [Escape] key.
26. Press [End].
27. Press the [OK] key.
28. Press the [User Tools/Counter] key.
• To register the name, see "Registering Names".
• You can enter up to 64 characters for the user name.
• You can enter up to 64 characters for the password.
• You can enter a server name using up to 64 characters.
Registering Folders
299
5