Ricoh LD220SPF

2. Select [System Settings] using [ ] or [ ], and then press the [OK] key.
3. Select [Administrator Tools] using [ ] or [ ], and then press the [OK] key.
4. Select [Prog./Change/Delete Realm] using [ ] or [ ], and then press the [OK] key.
5. Select [Delete] using [ ] or [ ], and then press the [OK] key.
6. Select the realm you want to delete using [ ] or [ ], and then press the [OK] key.
7. Press [Yes].
8. Press the [User Tools/Counter] key.
Programming the Realm
59
1