Ricoh Smart Operation Panel - Page 7

Notes:
In order to use Smart Device Connector on
one of the MFPs listed below, you must
update the Smart Operation Panel first, and
then also update the mainframe firmware
modules listed below.
󲻙 MP C2003/2503/3003/3503/4503/5503/6003
󲻙 MP C401
󲻙 MP 2553/3053/3353
Module MPC3003
MPC3503
MPC4503
MPC5503
MPC6003
MP2003
MP2503
System/Copy 3.06 3.07 2.06
FAX 11.00.00 10.00.00 7.00.00
Scanner 2.18 2.17 2.04
Network Support (NCS) 12.89 12.89 12.89
Web Support (NFA) 2.05 2.06 1.04
Printer 2.11 2.11 2.03
PCL 1.15 1.11 1.05
JavaVM 11.24.02 11.24.02 11.24.02
Smart Operation Panel G1.5
7