11
By default, you can run the plug-in for USB data transfer. Install a
new plug-in in the camera to use new functions.
See the user guide for details on how to use and install plug-ins.
Extending the Functions
You can use the camera in special modes by using the
plug-ins installed in the camera.
Running the Plug-in
Press and hold the mode button when the power is on to
run the plug-in installed in the camera. (
is displayed
on the OLED panel.)
Press and hold the mode button again to terminate the
plug-in.
Switching the Plug-ins
When multiple plug-ins are installed in the camera, the
plug-in selection screen is displayed when the mode
button is pressed and held.
To Next Page
Loading...
