Android
1. Enable the Wi-Fi™ of the smartphone.
2. Start "RICOH THETA" app on the smartphone.
3. Tap [Yes] after the below message.
"To connect to the camera, you must turn on the setting to use position information for this
device and then permit access from the app."
4. Tap [Θ icon] on the bottom right of the screen.
5. Tap [THETAYN********.OSC] displayed at [Unregistered camera] column on the screen.
6. When the wireless LAN connection is complete, Wireless LAN icon becomes lit.
*From the next time, after operating the above 1, 2 and 4, select the camera displayed at
[Registered camera] column on the screen.
To Next Page
Loading...
