Ricoh THETA Z1 - Shooting with Camera Only

RICOH THETA SC2 - User Guide
file:///C|/r22/en/support/manual/sc2/content/shooting-photo/shooting_photo_01.html[2019/11/12 2:04:23]
Top
>
Shooting Still Images
>
Shooting Still Images Using
Only the Camera
Shooting Still Images Using Only the Camera
This section explains basic methods for shooting still images.
1. Turn on the power of the camera.
2. Press the mode button to select the still image shooting mode.
appears on the OLED panel.
3. Position the camera.
Position the camera as upright as possible.
4. Press the shutter button.
The captured still image is saved in the internal memory of the camera.
Note