The RIDE VOLO K01 Kick Scooter is a personal scooter designed for children aged 3 and up. It is intended for recreational use on flat, clean, and dry surfaces, and is not equipped for road use, off-road use, or use with any motorized device. The scooter emphasizes safety, requiring an ASTM F1492 approved helmet and protective gear for all riders at all times. Adult supervision is recommended during use.
Technical Specifications:
- Materials: The scooter is constructed with an Aluminum stem, Nylon deck, PU (Polyurethane) wheels, and Rubber handle grips, ensuring a balance of durability and comfort.
- Scooter Dimensions: The overall dimensions are 22.4 inches in length, 9.1 inches in width, and a height adjustable between 29.1 and 35 inches (57x23x(74~89)cm).
- Handlebar Height: The handlebar offers four adjustable height levels: 29.1 inches (74cm), 31.1 inches (79cm), 33.1 inches (84cm), and 35 inches (89cm), accommodating children of various heights.
- Wheel Diameter: It features front wheels with a diameter of 4.7 inches (12cm) and a rear wheel with a diameter of 3 inches (7.6cm).
- Product Weight: The scooter weighs approximately 5.5 lbs (2.5 kg), making it lightweight and manageable for young riders.
- Maximum Load: It can support a maximum load of 110 lbs (50 kg). Users exceeding this weight limit should not ride the scooter.
- Certifications: The K01 Kick Scooter is certified to ASTM F963 standards, indicating compliance with safety specifications for toy safety.
Usage Features:
- Assembly: The stem is inserted into the scooter body by pressing a metal peg. Proper alignment is crucial, with the peg on the left side and the indent lining up with the opening between the front wheels. The peg should audibly click into place.
- Adjustable Stem: The handlebar height can be adjusted by opening the clamp, pressing the metal peg, and raising or lowering the stem to one of the three designated height levels. For safe riding, the metal peg must pop into a hole, and the clamp must be securely closed.
- Riding Instructions:
- Hold both handles firmly.
- Place one foot on the front of the deck.
- Use the other foot to push off the ground to propel the scooter forward.
- Once moving, place both feet on the deck as desired.
- To stop, step on the brake with the nearest foot.
- Practicing Guidelines:
- Wear casual clothing and flat shoes for flexibility and stability.
- Practice getting on, moving forward, turning, stopping, and dismounting until comfortable.
- Ride on even pavement; avoid slopes until experienced.
- Slow down when riding on uneven terrain, as the scooter is designed for relatively smooth, flat surfaces.
- Avoid areas with pedestrians or obstacles.
Maintenance Features:
- Regular Checks: All screws and fittings should be checked periodically to ensure they are secure. Loose screws and fixtures should be tightened.
- Lubrication: Add oil for lubrication periodically to maintain smooth operation.
- Bearing Replacement: Replace bearings when they show signs of wear to enhance product safety and performance.
- Brake Care: The braking mechanism can become hot with continuous use; avoid touching it immediately after use.
- No Modifications: Do not modify the scooter or change it in any way not outlined in the manual. Unauthorized modifications can compromise safety and void the warranty.
- Storage: Store the scooter properly to prevent damage.
- The K01 is a self-propelled scooter for a single rider only.
- Always wear appropriate safety gear, including an ASTM F1492 approved helmet, knee pads, and elbow pads.
- Supervise children during use and inform them of all safety guidelines.
- Do not allow users over 110 lbs (50 kg) to ride the scooter.
- Keep fingers away from moving parts to prevent pinching and entrapment.
- Never allow more than one person on the scooter at a time.
- Do not ride at night.
- Obey all outdoor regulations and yield to pedestrians.
- Exercise caution on wet pavement, as braking and wheel traction may be reduced.
- Do not perform stunts or dangerous maneuvers.
- Disassembling the product will void the warranty. Only Ride VOLO or an authorized party should perform service.
The RIDE VOLO K01 Kick Scooter comes with a One Year Limited Hardware Warranty, covering product defects in materials and workmanship under normal use. This warranty is valid for original purchasers residing in the United States and Canada. The warranty period begins on the purchase date and lasts for one year. Ride VOLO will, at its option, repair or exchange defective hardware with new or refurbished parts. The warranty covers one replacement of like-items and does not extend to items out of production. It is non-assignable and non-transferable. Service requests should be sent to support@ridevolo.com. The warranty does not cover damage due to transportation, storage, improper use, failure to follow instructions, lack of preventive maintenance, modifications, unauthorized repair, normal wear and tear, or external causes like accidents, abuse, or other events beyond Ride VOLO's control. The warranty specifically excludes consequential, incidental, special, or punitive damages and losses.
To Next Page
Need help?
General
