What to do if I forgot my RidgeWave Wireless Router login?
If you've forgotten your login details, try the default username "admin" and password "admin". If that doesn't work, restore your RidgeWave Wireless Router to its factory settings by pressing the reset button on the device's rear side.
What to do if I can't PING any PC on my RidgeWave Wireless Router LAN?
First, check the Ethernet LEDs on the front panel of your RidgeWave Wireless Router. The LED should be lit for the port with a connected PC. If it's not lit, ensure the cable between your router and the PC is properly connected. Also, uninstall your firewall program before troubleshooting. Finally, verify that the IP address and subnet mask are consistent for both the router and the workstations.
Why none of the LEDs are on when I turn on my RidgeWave Wireless Router?
General| Brand | RidgeWave |
|---|---|
| Model | 6300NEL |
| Category | Wireless Router |
| Language | English |
Overview of the RIDGEWAVE 6300NEL router, its features, and capabilities.
Lists key features and technical specifications of the 4G/LTE Wireless Broadband Router.
Details the physical interfaces and hardware components of the router.
Illustrates the router's connectivity options in 4G/LTE and Broadband Router modes.
Provides essential warnings and attention points for safe and proper operation of the router.
Describes the status and meaning of each LED indicator on the router's front panel.
Details the function and purpose of each port and connector on the rear of the router.
Provides guidance on proper cabling to avoid connection issues and ensure optimal performance.
Guides on configuring PC network settings for IPv4 across different Windows versions.
Guides on configuring PC network settings for IPv6 across different Windows versions.
Provides default username, password, IP address, and DHCP server settings for the router.
Explains the information needed from your Internet Service Provider for configuration.
Instructions on how to access the router's web interface using a browser and default credentials.
Explains how to check the router's working status, including device info, logs, and connections.
A guided setup process to quickly configure the router for internet connectivity.
Covers configuration for Internet, LAN, Wireless, and MAC Filter settings.
Details advanced features like Firewall, Routing, NAT, QoS, and Time Schedule.
Explains managing user accounts, SNMP, UPnP, Dynamic DNS, and access control.
Covers device maintenance tasks such as User Management, Time Zone, Firmware, and System Restart.
Lists common router issues like no LEDs or forgotten credentials and their solutions.
Addresses issues with pinging PCs on the LAN and verifying network consistency.
Provides steps for recovering the router from incorrect LED display or firmware upgrade failures.
Information on how to contact BEC for product support and assistance.
To Next Page
