RIDGID R32102 - User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
7-1/4 in. WORM DRIVE SAW
DOUBLE INSULATION
184 mm SCIE À TRANSMISSION À VIS
DOUBLE ISOLATION
184 mm SIERRA CON ENGRANAJE SINFÍN
DOBLE AISLAMIENTO
R32102
CONSERVER CE MANUEL POUR
FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL PARA
FUTURAS CONSULTAS
To register your RIDGID product,
please visit:
http://register.RIDGID.com
Pour enregistrer votre produit de
RIDGID, s’il vous plaît la visite:
http://register.RIDGID.com
Para registrar su producto
de RIDGID, por favor visita:
http://register.RIDGID.com
SAVE THIS MANUAL FOR FUTURE REFERENCE
Cette scie a été conçue et fabriquée conformément à nos strictes
normes de fiabilité, simplicité d’emploi et sécurité d’utilisation.
Correctement entretenue, elle vous donnera des années de fonc-
tionnement robuste et sans problème.
AVERTISSEMENT :
Pour réduire les risques de blessures, l’utilisateur doit
lire et veiller à bien comprendre le manuel d’utilisation
avant d’employer ce produit.
Merci d’avoir acheté un produit RIDGID®.
Esta sierra ha sido diseñada y fabricada de conformidad con
nuestras estrictas normas para brindar fiabilidad, facilidad de uso
y seguridad para el operador. Con el debido cuidado, le brindará
muchos años de sólido funcionamiento y sin problemas.
ADVERTENCIA:
Para reducir el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador antes de usar
este producto.
Le agradecemos la compra de un producto RIDGID®.
Your saw has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety.
When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING:
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.
Thank you for buying a RIDGID® product.

Summary

GENERAL POWER TOOL SAFETY

ELECTRICAL SAFETY

PERSONAL SAFETY

Personal protective measures and operator awareness for safe tool operation.

CIRCULAR SAW SAFETY

KICKBACK PREVENTION

Explanation of kickback causes and methods to prevent it during operation.

CALIFORNIA PROPOSITION 65 WARNING

ADDITIONAL SAFETY RULES

Further essential safety guidelines specific to operating the circular saw.

PRODUCT FEATURES

ASSEMBLY INSTRUCTIONS

ATTACHING THE BLADE

Step-by-step instructions for securely attaching the saw blade to the spindle.

REMOVING THE BLADE

Step-by-step instructions for safely removing the saw blade from the spindle.

OPERATION GUIDELINES

BLADE AND GUARD SYSTEMS

KICKBACK AND PREVENTION

Explanation of kickback causes and recommended methods to prevent it.

STARTING AND STOPPING THE SAW

ADJUSTING BLADE DEPTH

OPERATING THE SAW SAFELY

CROSS CUTTING TECHNIQUE

RIP CUTTING TECHNIQUE

BEVEL CUTTING TECHNIQUE

POCKET CUTTING PROCEDURE

ADJUSTMENTS AND MAINTENANCE

GENERAL MAINTENANCE AND CLEANING

LUBRICATION AND OIL CHECK

CHANGING THE OIL

BRUSH REPLACEMENT

CUSTOMER SERVICE AND SUPPORT

CONTACTING FOR SERVICE AND PARTS

RIDGID R32102 Specifications

General

Type	Table Saw
Motor Power	15 Amps
Cord Length	6 ft
Blade Diameter	10 inches
Bevel Capacity	0-45 degrees
Dust Port	2.5 in