RIDGID R86047 User Manual

INCLUDES: Angle Grinder, Side Handle,
Type 27 Grinding Wheel, Operator’s Manual
TABLE OF CONTENTS
****************
 General Power Tool Safety
Warnings .........................................2-3
 Angle Grinder Safety Warnings .......3-5
 Symbols ..............................................6
 Features ..............................................6
 Assembly .........................................7-8
 Operation .........................................8-9
 Maintenance .....................................10
 Illustrations ..................................12-14
 Parts Ordering and
Service ................................Back page
INCLUT : Meuleuse d’angle, poignée
latérale, type 27 meule disque, manuel
d’utilisation
TABLE DES MATIÈRES
****************
 Avertissements de sécurité générales
relatives aux outils électriques ........2-3
 Avertissements de sécurité
relatifs meuleuse d’angle ................3-5
Symboles ............................................6
 Caractéristiques .................................6
 Assemblage .....................................7-8
 Utilisation ......................................8-10
 Entretien ...........................................11
 Illustrations ..................................12-14
 Commande de pièces
et dépannage ....................Page arrière
INCLUYE: Amoladora angular, mango
lateral, type 27 muela abrasiva, manual
del operador
ÍNDICE DE CONTENIDO
****************
 Advertencias de seguridad
para herramientas eléctrica ........... 2-3
 Advertencias de
amaladora angular .......................... 3-5
Símbolos ............................................6
 Características ...................................6
 Armado .......................................... 7-8
 Funcionamiento ........................... 8-10
 Mantenimiento .................................11
 Illustraciones .............................. 12-14
 Pedidos de piezas
y servicio .......................Pág. posterior
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT 4-1/2 in. BRUSHLESS ANGLE GRINDER
115 mm (4-1/2 po) MEULEUSE D’ANGLE SANS BALAI DE 18 V
115 mm (4-1/2 pulg.)
AMALADORA ANGULAR
SIN ESCOBILLAS DE 18 V
R86047
WARNING:
To reduce the risk of injury, the
user must read and understand
the operator’s manual before
using this product.
AVERTISSEMENT :
Pour réduire les risques de
blessures, l’utilisateur doit lire
et veiller à bien comprendre
le manuel d’utilisation avant
d’utiliser ce produit.
ADVERTENCIA:
Para reducir el riesgo de
lesiones, el usuario debe leer
y comprender el manual del
operador antes de usar este
producto.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
NOTE: THE OCTANE LOGO WAS NOT ADDED TO THE RELEASED FOR PRINT MANUAL. IT HAS BEEN
ADDED TO THE FRONT COVER HERE JUST AS AN EXAMPLE.
To register your RIDGID product,
please visit:
register.ridgidpower.com
Pour enregistrer votre produit de
RIDGID, s’il vous plaît la visite :
register.ridgidpower.com
Para registrar su producto de
RIDGID, por favor visita:
register.ridgidpower.com

RIDGID R86047 Specifications

General

Type	Angle Grinder
Voltage	18V
Wheel Diameter	4.5 inches
Weight	4.5 lbs
Arbor Size	5/8 in
Spindle Thread	5/8 in - 11

Summary

General Power Tool Safety

Work Area, Electrical, and Personal Safety

Covers safe practices for the work environment, electrical connections, and personal protection during tool use.

Power Tool Use and Care

Guidelines for proper tool operation, maintenance, and preventing misuse.

Battery Tool Use and Care

Safe usage and maintenance procedures for battery-powered tools and their packs.

Angle Grinder Specific Safety

Common Safety for Operations

General safety warnings for grinding, sanding, wire brushing, and polishing operations.

Kickback and Operation Safety

Key warnings related to kickback, safe handling, and operating procedures for angle grinders.

Operation-Specific Safety Warnings

Detailed safety advice for grinding, sanding, and polishing tasks.

Wire Brush and Additional Safety

Safety rules for wire brush use and other essential precautions.

Symbols and Features

Understanding Symbols

Explanation of signal words and product symbols to understand risk levels and proper usage.

Product Specifications

Key technical specifications for the angle grinder, including capacity and speed.

Assembly and Setup

Unpacking and Initial Inspection

Instructions for safely unpacking the tool and verifying all included items.

Installing Grinding Wheel

Step-by-step guide for safely attaching the grinding wheel to the tool.

Installing Side Handle

Instructions for mounting the side handle for improved control during operation.

Operation and Usage

Applications

Lists the intended uses and applications for the angle grinder.

Starting, Stopping, and Operating

Procedures for safely starting, stopping, and operating the angle grinder.

Overload Protection

Explanation of the tool's overload protection feature and how to manage it.

Maintenance and Care

General Maintenance Procedures

Guidelines for routine cleaning and care of the tool and its parts.

Replacing the Guard

Instructions for safely removing and replacing the tool's guard.

Removing and Replacing the Filter

Steps for accessing, cleaning, and reinstalling the tool's filter.

Customer Service Information

Service and Support Contact

Contact details and procedures for obtaining parts, service, or warranty information.