RIDGID R87547 User Manual

INCLUDES: Multi-Material Saw, Tile
Cutting Wheel, Metal Cutting Wheel,
Carbide Abrasive Cutting Wheel, Shoe,
Clamp, Operator’s Manual
TABLE OF CONTENTS
****************
 General Power Tool Safety
Warnings .........................................2-3
 Safety Instructions for
Multi-material Saws ........................3-5
 Symbols ..............................................6
 Features ..............................................7
 Assembly .........................................7-8
 Operation .......................................8-11
 Maintenance .....................................12
 Illustrations ..................................13-14
 Parts Ordering and
Service ................................Back page
INCLUT : Scie multi matériau, meule
à tronçonner pour carrelage, meule à
tronçonner pour métal, meule à tronçonner
abrasive en carbure, patin, bride, manuel
d’utilisation
TABLE DES MATIÈRES
****************
 Avertissements de sécurité générales
relatives aux outils électriques ........2-3
 Consignes de sécurité pour la scie
multi matériau .................................3-5
Symboles ............................................6
 Caractéristiques .................................7
 Assemblage .....................................7-8
 Utilisation ......................................8-11
 Entretien ...........................................11
 Illustrations ..................................12-13
 Commande de pièces
et dépannage ....................Page arrière
INCLUYE: Sierra para varios materiales,
disco para cortar losas, disco para
cortar metal, disco de corte abrasivo
de carburo, zapata, abrazadera, manual
del operador
ÍNDICE DE CONTENIDO
****************
 Advertencias de seguridad
para herramientas eléctrica ........... 2-3
 Instrucciones de seguridad para
sierras de varios materiales ............ 3-5
Símbolos ............................................6
 Características ...................................7
 Armado .......................................... 7-8
 Funcionamiento ........................... 8-11
 Mantenimiento .................................11
 Illustraciones .............................. 12-13
 Pedidos de piezas
y servicio .......................Pág. posterior
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT 3 in. BRUSHLESS MULTI-MATERIAL SAW
SCIE MULTI MATÉRIAU SANS
BALAI 18 V de 76,20 mm (3 po)
SIERRA PARA VARIOS MATERIALES SIN ESCOBILLAS
de 18 V de 76,20 mm (3 pulg.)
R87547
To register your RIDGID
product, please visit:
http://register.RIDGID.com
Pour enregistrer votre
produit de RIDGID,
s’il vous plaît la visite :
http://register.RIDGID.com
Para registrar su producto
de RIDGID, por favor visita:
http://register.RIDGID.com
WARNING:
To reduce the risk of injury, the
user must read and understand
the operator’s manual before
using this product.
AVERTISSEMENT :
Pour réduire les risques de
blessures, l’utilisateur doit lire
et veiller à bien comprendre
le manuel d’utilisation avant
d’utiliser ce produit.
ADVERTENCIA:
Para reducir el riesgo de
lesiones, el usuario debe leer
y comprender el manual del
operador antes de usar este
producto.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE

RIDGID R87547 Specifications

General

Battery Voltage	18V
Blade Diameter	7-1/4 inches
Arbor Size	5/8 inches
Bevel Capacity	0 to 50 degrees
No Load Speed	5, 800 RPM
Blade Length	7-1/4 inches
Battery Type	Lithium-Ion

Summary

General Power Tool Safety Warnings

Work Area and Electrical Safety

Safety related to the work environment and electrical connections.

Personal Safety and Tool Operation

Operator safety, alertness, proper dress, and tool usage guidelines.

Battery Tool Safety

Specific safety instructions for battery-powered tools.

Safety Instructions for Multi-Material Saws

Wheel and Guard Safety

Safe use of the wheel guard and selection of appropriate cutting wheels.

Accessory Specifications and Use

Requirements for accessory size, type, speed, and inspection.

Operational Safety and Kickback

Safe handling, workpiece support, preventing kickback, and PPE.

Kickback Prevention and Handling

Detailed explanation of kickback and proactive measures to avoid it.

Additional Safety Precautions

Safety measures for PPE, bystanders, tool operation, and environmental hazards.

Safe Cutting Techniques

Guidelines for preventing wheel binding, proper cut restart, and avoiding unsafe operations.

Additional Operational Safety Rules

Rules for securing workpiece, checking tool condition, and saving instructions.

Symbols and Signal Words

Understanding Signal Words

Explanation of DANGER, WARNING, CAUTION, and NOTICE signal word meanings.

Product and Unit Symbols

Meanings of symbols related to safety, operation, and measurements.

Features and Assembly

Product Specifications

Technical details of the multi-material saw.

Unpacking and Initial Checks

Steps for unpacking the tool and checking for damage or missing parts.

Cutting Wheel Selection and Installation

Guidance on choosing and installing the correct cutting wheels.

Shoe Assembly Installation

Instructions for attaching and adjusting the shoe assembly.

Assembly Procedures

Installing a Cutting Wheel

Step-by-step guide for installing a cutting wheel onto the saw.

Removing a Cutting Wheel

Instructions for safely removing the cutting wheel from the saw.

Operation Overview

Controls and Triggers

Explanation of the variable speed switch trigger and direction selector.

Applications and Battery Management

Supported cutting applications and battery pack installation/removal.

Overload Protection and Cooling

How overload protection works and cooling requirements for the tool.

LED Light and Guard Positioning

Function of the LED light and how to correctly position the guard.

Kickback Hazards and Prevention

Understanding kickback and methods to prevent it.

Cutting Specific Materials

Techniques for cutting tiles, plastics, and metals safely.

Maintenance and Cleaning

General Maintenance and Cleaning

Guidelines for general cleaning and avoiding damage to plastic parts.

Cleaning the Air Filter

Steps for removing, cleaning, and replacing the tool's air filter.