To Next PageTo Next Page
Need help?Do you have a question about the Riello Burners RG2 377T1 and is the answer not in the manual?
General| Brand | Riello Burners |
|---|---|
| Model | RG2 377T1 |
| Category | Burner |
| Language | English |
Lists specific components like flange, screws, and oil pipes included with the burner.
Provides physical measurements of the burner unit in millimeters.
Shows the relationship between light oil output, pressure, and thermal power.
Details the process of attaching the burner flange to the boiler using screws and gaskets.
Explains how to connect the oil supply pipes, allowing for left or right side entry.
Covers pump configuration, pipe setup (one-pipe/two-pipe), and priming procedures.
Details electrical connections, components, safety, and testing procedures for the burner.
Explains how to adjust combustion based on output, pressure, and air settings using a provided table.
Lists recommended nozzle types and sizes for specific burner outputs.
Details how to adjust the electrodes for proper ignition and function.
Explains how to adjust the pump pressure and notes its factory setting.
Describes how to set the combustion head for optimal output based on a regulating rod.
Explains how to adjust the air damper for proper airflow control.
Illustrates the normal and lock-out sequences for burner start-up, including timing.
