Need help?Do you have a question about the Riello AARIA PRO P Series and is the answer not in the manual?
General| Refrigerant | R32 |
|---|---|
| Type | Split System Air Conditioner |
| Series | P Series |
| Operating Temperature (Heating) | -15°C to 24°C |
| Power Supply | 220-240 V, 50 Hz |
Important initial checks and general product information.
Essential safety regulations and warnings for using the unit.
Overview of the AARIA PRO P heat pump and its features.
Details on the unit's integrated safety and adjustment mechanisms.
How to identify the unit using its technical data plate.
Diagrams showing the physical components of the outdoor unit.
Performance data, energy ratings, and electrical characteristics.
Required minimum floor space for indoor unit installation based on gas charge.
Temperature ranges for cooling and heating modes.
Explanation of the heat pump's refrigerant cycle and components.
Contents of the packaging and initial checks upon delivery.
Location of package and transport labels on the unit.
Physical dimensions and weight of the unit packaging.
Guidelines for storing the unit before installation.
Instructions for safe handling and unpacking of the unit.
Criteria for selecting an appropriate installation location outdoors.
Required clearances for installation and maintenance.
Guidelines for correctly positioning the unit on the ground or suspended.
Considerations for integrating the unit with existing systems.
Procedures and specifications for connecting refrigerant lines.
Electrical schematics for different unit models.
Steps for connecting the unit to the main power supply.
Pre-checks before powering on the unit for the first time.
Procedure for adding refrigerant if pipe length exceeds limits.
Steps to activate the unit after initial preparation.
Post-activation checks for proper operation.
Routine procedures to keep the equipment efficient and safe.
Information regarding refrigerant type and quantity on the unit label.
Annual maintenance checks and schedule.
Instructions for cleaning the unit's heat exchanger.
Explanation of unit status indicators and fault codes.
To Next Page