Need help?Do you have a question about the Riello AMS N and is the answer not in the manual?
General| Brand | Riello |
|---|---|
| Model | AMS N |
| Category | Air Conditioner |
| Language | English |
Unit complies with Low Voltage Directive 2014/30 EU.
Unit complies with EMC Directive 2014/35 EU as amended.
Unit complies with RoHS Directive 2011/65 EU.
Installation by skilled operators; compliance with intended use.
Careful handling of refrigerant gas; repairs by qualified personnel.
Storm safety, air circulation, low temp hazards, manual importance.
Avoid touching parts, unassisted use, water spray, surface load.
Disconnect power before accessing covers or adjusting louvres.
Do not pull, detach, or twist electrical wires.
Floor/ceiling unit, copper/aluminum exchanger, regenerable filters, galvanized steel frame.
Self-extinguishing plastic casing, suction screen, control panel, switches, lamps, grills, louvres.
Floor unit, copper/aluminum exchanger, regenerable filters, galvanized steel frame, plastic casing.
Control panel functions managed by infra-red remote control, lists key elements.
Explains symbols for timer, fan speed, lock, swing, sleep, health, mode, and temperature/time display.
How to set the desired temperature using the remote control keys.
Details keys for CODE, LIGHT, Timer, Clock, Sleep, Method, Time, Health, On-Off.
Details keys for Temp (+/-), Fan, Swing, Health Airflow, Fresh, Set, Power/Soft, Lock, Reset.
First commissioning must be performed by RIELLO Technical Service.
Restarting the unit and guidelines for remote control usage and protection.
Instructions for battery replacement and safe disposal.
Recommends and explains how to perform a manual reset of the unit.
Steps to reset and set the current time via remote control.
Activating and deactivating the ionizer for improved air quality.
Adjusts temperature and fan speed for comfortable sleep.
Overview of setting start and/or stop times for the unit.
Configure the desired start time for the unit.
How to activate and deactivate the automatic start timer.
Configure the desired stop time for the unit.
How to activate and deactivate the automatic stop timer.
Set start time before stop time to define operating duration.
Set stop time before start time to define inactive duration.
Unit automatically switches between cooling and heating for constant temperature.
Steps to activate and turn off the auto mode.
Unit acts as a hot air generator within specific temperature ranges.
Steps to activate and turn off the heating mode.
Unit produces cooled and dehumidified air within specific temperature ranges.
Steps to activate and turn off the cooling mode.
Reduces room humidity; unit cycles at low speed when temp drops.
Steps to activate and turn off the dehumidification mode.
Operates fan only for air circulation; no automatic speed selection.
Steps to activate and turn off the ventilation mode.
Controls vertical airflow direction and angle using Swing key.
Controls horizontal airflow direction and angle using Swing key.
Provides instant heating/cooling with maximum fan speed.
Operates the unit in silent mode at the lowest fan speed.
Orients louvres to avoid direct airflow on people.
How to safely turn off the unit for short periods of absence.
Steps for safely shutting down the unit for long-term non-use.
Regular maintenance ensures unit effectiveness, safety, and longevity.
How to clean the mesh filters for the AMS unit, including warnings.
How to clean the mesh filters for the AMT unit, including warnings.
How to activate/deactivate the unit using the auxiliary switch for emergencies.
Checks for power issues including plug, mains switch, and batteries.
Checks for ineffective cooling/heating related to filters or settings.
Identifies abnormal operations via flashing lights and reset procedures.
Lists error codes and their meanings for the AMS N unit.
Lists error codes and their meanings for the AMT N unit.
To Next Page