Need help?Do you have a question about the Riello RCM NX Series and is the answer not in the manual?
Lists models and codes for 2-pipe units with external cabinets.
Lists models and codes for 2-pipe units designed for concealed installation.
Lists models and codes for 4-pipe units with external cabinets.
Lists models and codes for 4-pipe units designed for concealed installation.
Describes the physical components and features of the fan coil unit.
Explains how control and adjustment are performed using available accessories.
Details the importance and information provided by the unit's technical tag.
Provides detailed performance and electrical specifications for 2-pipe models.
Provides detailed performance and electrical specifications for 4-pipe models.
Specifies dimensions and features for cabinet versions.
Specifies dimensions and features for concealed versions.
Provides initial advice for receiving the product safely.
Lists items included in the product delivery.
Outlines safe procedures for moving and transporting the unit.
Explains how to access the internal components of the unit safely.
Guides on site selection, minimum distances, and initial installation considerations.
Illustrates required clearances for wall-mounted cooler-convectors.
Details the procedure for inverting water connections on the unit.
Provides instructions for installing the unit vertically on the floor.
Explains how to mount the unit vertically on a wall.
Guides for installing the unit horizontally on a ceiling.
Details the process and considerations for making hydraulic connections.
Explains requirements and methods for setting up the condensate drain.
Provides preliminary instructions and connection steps for electrical wiring.
Details fan motor types, speeds, and wiring color codes.
Instructions on how to fill the hydraulic system before operation.
Guides on how to evacuate air from the system during the filling process.
Outlines the essential steps and checks for the initial unit start-up.
Emphasizes the importance of routine maintenance for unit efficiency and safety.
Provides instructions for cleaning the external surfaces of the unit.
Details the procedure for cleaning the air suction filter.
Recommends checking the condensate drain for obstructions during summer.
Advises checking heat exchanger fins for blockages at season changes.
States that the motor is permanently lubricated and requires no periodic maintenance.
Offers guidance on actions to take in case of water leaks or anomalous functioning.
Lists common anomalies, their causes, and recommended remedies.
Lists models and codes for 2-pipe units with external cabinets.
Lists models and codes for 2-pipe units designed for concealed installation.
Lists models and codes for 4-pipe units with external cabinets.
Lists models and codes for 4-pipe units designed for concealed installation.
Describes the physical components and features of the fan coil unit.
Explains how control and adjustment are performed using available accessories.
Details the importance and information provided by the unit's technical tag.
Provides detailed performance and electrical specifications for 2-pipe models.
Provides detailed performance and electrical specifications for 4-pipe models.
Specifies dimensions and features for cabinet versions.
Specifies dimensions and features for concealed versions.
Provides initial advice for receiving the product safely.
Lists items included in the product delivery.
Outlines safe procedures for moving and transporting the unit.
Explains how to access the internal components of the unit safely.
Guides on site selection, minimum distances, and initial installation considerations.
Illustrates required clearances for wall-mounted cooler-convectors.
Details the procedure for inverting water connections on the unit.
Provides instructions for installing the unit vertically on the floor.
Explains how to mount the unit vertically on a wall.
Guides for installing the unit horizontally on a ceiling.
Details the process and considerations for making hydraulic connections.
Explains requirements and methods for setting up the condensate drain.
Provides preliminary instructions and connection steps for electrical wiring.
Details fan motor types, speeds, and wiring color codes.
Instructions on how to fill the hydraulic system before operation.
Guides on how to evacuate air from the system during the filling process.
Outlines the essential steps and checks for the initial unit start-up.
Emphasizes the importance of routine maintenance for unit efficiency and safety.
Provides instructions for cleaning the external surfaces of the unit.
Details the procedure for cleaning the air suction filter.
Recommends checking the condensate drain for obstructions during summer.
Advises checking heat exchanger fins for blockages at season changes.
States that the motor is permanently lubricated and requires no periodic maintenance.
Offers guidance on actions to take in case of water leaks or anomalous functioning.
Lists common anomalies, their causes, and recommended remedies.
To Next Page
General