To Next PageTo Next Page
Need help?Do you have a question about the Riello WRW and is the answer not in the manual?
General| Brand | Riello |
|---|---|
| Model | WRW |
| Category | Remote Control |
| Language | English |
Turns the air conditioning unit on or off.
Scrolls through operation modes: AUTO, COOL, DRY, HEAT, FAN.
Selects fan speeds: AUTO, LOW, MED, HIGH.
Saves energy during sleeping hours.
Activates lonizer/Plasma Dust Collector for cleaner air.
Enables unit to reach preset temperature in shortest possible time.
Starts and stops the self-clean feature.
Used to enter the energy efficient mode.
Increases temperature in 1°C increments.
Decreases temperature in 1°C increments.
Sets timer to turn unit on.
Sets timer to turn unit off.
Starts and stops louver movement.
Temperature sensing and room temperature display.
Turns indoor unit's LED display on and off.
Sets and activates your favorite pre-settings.
Instructions for inserting and replacing AAA batteries in the remote control.
Tips for optimal battery performance and storage.
Guidance on effective remote control operation, range, and interference.
Guidance on proper disposal of used batteries according to local laws.
Lights up when the remote sends a signal to the indoor unit.
Displays the current operating mode (AUTO, COOL, DRY, HEAT, FAN).
Appears when the unit is turned on and disappears when turned off.
Displays when the TIMER ON function is set.
Displays when the TIMER OFF function is set.
Indicates when the ECO mode is active (not available for this unit).
Displays timer settings and status.
Indicates low battery status (detection).
Displays when the SLEEP function is activated.
Indicates that the FOLLOW ME function is on.
Indicates FRESH function status (not available for this unit).
Shows selected FAN SPEED (AUTO, LOW, MED, HIGH).
Displays set temperature or timer setting.
How to adjust the desired operating temperature within the 17-30°C range.
Steps to operate the unit in AUTO mode, selecting mode based on temperature.
Steps to operate the unit in COOL mode, setting temperature and fan speed.
Steps to operate the unit in DRY (dehumidifying) mode.
Steps to operate the unit in FAN mode, selecting fan speed.
Steps to operate the unit in HEAT mode, setting temperature and fan speed.
Sets a period of time after which the unit will automatically turn on.
Sets a period of time after which the unit will automatically turn off.
Guide to setting both TIMER ON and TIMER OFF for sequential operation.
Makes the unit work extra hard to reach the present temperature quickly.
Cleans the unit automatically, evaporating moisture.
Enters energy-efficient mode, adjusting temperature and fan speed.
Restores or resumes previous settings.
Controls vertical and horizontal louver movement for airflow direction.
Measures ambient temperature from remote for optimized comfort.
Decreases energy use while you sleep.
