Rievtech ELC Series - Page 20

EN
Programmable Relay ● User Manual for ELC, EXM and PR Series 20 2020 v6.0 ● © Rievtech Co.,
Ltd. ● www.rievtech.com
 I1 to I8 and ID to IG (PR-26)
 I11 to I14 (PR-E expansion with address 1)
 AI161 to AI164 (PR-E expansion with address 16)
 Digital Outputs
 Q1 to Q2 (PR-6)
 Q1 to Q4 (PR-12, PR-14, EXM-12)
 Q1 to Q6 (PR-18)
 Q1 to QA (PR-24, PR-26)
 Q11 to Q18 (PR-E expansion with address 1)
 Q161 to Q168 (PR-E expansion with address 16)
 Digital Flag blocks
 F1-F32 (PR-6 and PR-12-E)
 F1-F256 (PR-12, PR-18, PR-24, PR-26 and EXM)
 -F8: Start-up flag
 -F63: Buzzer of ELC-43TS control bit
 -F64: Backlight control bit (to control the
backlight of LCD and backlight of ELC-43TS)
 Analogue Flag blocks
 AF1-AF32 (PR-6 and PR-12-E)
 AF1 to AF256 (PR-12, PR-18, PR-24, PR-26 and
EXM)
 Shift register bits S1 to S8