Rievtech ELC Series - Page 207

EN
Programmable Relay ● User Manual for ELC, EXM and PR Series 207 2020 v6.0 ● © Rievtech Co.,
Ltd. ● www.rievtech.com
Absolute Humidity
Description of function
This function is used to calculate the absolute humidity.
Connection
Description
Input En ( )
Enable the function
Input T
Temperature
Output RH
Humidity
Output AQ
Absolute humidity
Calculation Rule:
Analogue Table
Description of function
This function provides the ability to output an analogue
value based on analogue inputs using a look-up table.
Connection
Description
Selection
When an input trigger is High, this
block is enabled.
Channel B
Analogue Input B value
Range: -32,768 to +32,768
Channel A
Analogue Input A value
Range: -32,768 to +32,768
Out
Analogue Output value from table
Range: -327.68 to + 327.67
NOTICE:
The output value is multiplied by 100 to provide
the actual output. So, a value 76.54 in an output column
would result in an analogue value of 7,654 being output.
Parameter Description