Rievtech ELC Series - Page 291

EN
Programmable Relay ● User Manual for ELC, EXM and PR Series 291 2020 v6.0 ● © Rievtech Co.,
Ltd. ● www.rievtech.com
UDP Server port 8001
Slave2
IP: 192.168.0.102
UDP Server port 8002
Slave3
IP: 192.168.0.103
UDP Server port 8003
Step 2 Program in master and slave
Master program
B001 is used to transfer I1 status to the F1 of slave1 by
UDP connection.
The Remote1 is the target UDP server setting in the
network parameter: