Rievtech ELC Series - Page 292

EN
Programmable Relay ● User Manual for ELC, EXM and PR Series 292 2020 v6.0 ● © Rievtech Co.,
Ltd. ● www.rievtech.com
B002 is used to transfer I1 status to the F1 of slave2 by
UDP connection.
The Remote2 is the target UDP server setting in the
network parameter:
B003 is used to transfer I1 status to the F1 of slave3 by
UDP connection.
The Remote3 is the target UDP server setting in the
network parameter: