Rievtech ELC Series - Page 293

EN
Programmable Relay ● User Manual for ELC, EXM and PR Series 293 2020 v6.0 ● © Rievtech Co.,
Ltd. ● www.rievtech.com
B004 is used to read AI1 value from slave1 and save the
value into AF1 by UDP connection.
The Remote1 is the target UDP server setting in the
network parameter:
B005 is used to read AI1 value from slave2 and save the
value into AF2 by UDP connection.
The Remote2 is the target UDP server setting in the
network parameter: