Rievtech ELC Series - Page 349

EN
Programmable Relay ● User Manual for ELC, EXM and PR Series 349 2020 v6.0 ● © Rievtech Co.,
Ltd. ● www.rievtech.com
Product Specifications
Specifications
CPU
Item PR-24AC-R PR-24DC-DA-R
PR-24DC-DAI-RTA
Output No 10 (Q1-QA) 9 (Q1-Q8,AQ9)
Relay output
10A
Yes
-
-
-
-
0.65A
6 (Q1-Q6) Relay output
2 (Q7-Q8)Transistor PNP output
1 (AQ9)Analog output (0-10/0-20mA)
Resistive load 10A/Inductive load 2A Max. 0.3A per channel
AC 250V
DC 110V
DC 5-30V
1250VA
300W
105 Operations at Rated Resistive Load
Against short-circuits: None
Against overvoltages and overloads: None
107 Operations at No Load condition
Outputs
Output type
Continuous current
Max breaking voltage
Max allowable
power force
Electrical durability
expectancy
Built-in protections
Response time OperateTime: 15 ms max
ReleaseTime: 10 ms max
10Hz -
2Hz
10Hz
0.5Hz
10kHz
Q7, Q8 must have same
frequency when PWM works
< 0.5 % (20 % - 80 %) load at 10 mA
< 0.5% (20 % - 80 %) load at 10 mA
50mA
20m
0 to 100 %
DC 0?0V
AQ9 (0..1000) =V1(0...10V)
0.01V
0.02V
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Switch
frequency
AQ
Voltage signal
PWM
Output
Mechanism
Resistor/light load
Sensitive load
PWM frequency
PWM accuracy at 120Hz
PWM accuracy at 500Hz
Max. cable length PWM
PWM cyclic ratio
Output signal
Internal value and signal
relationship
Resolution
Accuracy at 25 癈
0..20mA
AQ9 (0..1000) = I1(0...20mA)
0.02mA
0.05mA
AQ
Current signal
Output signal
Internal value and signal
relationship
Resolution
Accuracy at 25 癈
Max. Breaking current
PWM
Max breaking current
- < 2V for I = 0.3A (at state 1)Voltage drop
Galvanic isolation
Relay Transistor