The Rifton Blue Wave Toileting System (models E806 & E808) is a versatile Class 1 medical device designed to assist individuals with toileting, showering, and hygiene needs. It can be configured for use over a toilet, as a free-standing unit, or as a shower chair, making it suitable for both domestic and institutional environments. The system is designed to comply with ANSI A112.19.2M (Toilet bowls, USA), ANSI Z124.5 (Toilet seats, USA), or BS 5503 (Toilet bowls, UK), and BS 1254 (Toilet seats, UK) standards.
Function Description:
The Blue Wave Toileting System provides support and positioning for users during toileting and showering. Its modular design allows for various configurations to meet individual needs, including different seat depths, back heights, and accessory options. The system aims to promote independence and dignity in personal care routines.
Important Technical Specifications:
The system offers two main sizes: small and large, with varying dimensions for different components.
- Height:
- Small: 30-50 inches (76-127 cm)
- Large: 48-72 inches (122-183 cm)
- Frame Width:
- Small: 20½ inches (52 cm)
- Large: 20½ inches (52 cm)
- Seat Height Above Floor:
- Small: 10-20 inches (25-51 cm)
- Large: 15½-20 inches (39-51 cm)
- Seat Width:
- Small: 12 inches (30 cm)
- Large: Front 16 inches (41 cm), Rear 12 inches (30 cm)
- Seat Depth:
- Small: 9, 11, 23, 28 inches (23, 28 cm)
- Large: 11½, 13½ inches (29, 35 cm)
- Armrest Height Above Seat:
- Small: 5½ inches (14 cm)
- Large: 7 inches (18 cm)
- Hole Size:
- Small: 3 x 9 inches (8 x 23 cm)
- Large: 4 x 10 inches (10 x 25 cm)
- Hole Size (with deflector):
- Small: 2¾ x 8¾ inches (7 x 22 cm)
- Large: 3½ x 9½ inches (9 x 24 cm)
- Clearance to Floor (for over toilet):
- Small: 19 inches (48 cm)
- Large: 19 inches (48 cm)
- Back Height:
- Small: 24 inches (61 cm)
- Large: Low back 18 inches (46 cm), High back 34 inches (86 cm)
- Max. Working Load:
- Small: 180 lbs (82 kg)
- Large: 180 lbs (82 kg)
Usage Features:
- Tool-Free Assembly: The system is designed for easy assembly and adjustment without the need for tools.
- Multiple Configurations:
- Mounted on the toilet, with or without backrest: The toilet seat and mounting bar can be attached to a standard toilet bowl. This configuration requires checking the toilet bowl and seat bolts for age or wear and ensuring the mounting bar is properly attached.
- Over the toilet: The free-standing frame can be positioned over a toilet. The seat height and footboard can be adjusted.
- Free standing unit as a shower chair: The system can be used independently as a shower chair, with adjustable seat height and footboard.
- Adjustable Seat Depth: The Rifton toilet seat offers multiple seat depth settings (9", 11", 13¼", 13¾" for large seat; 9", 11" for small seat) to accommodate different users.
- Deflector and Large Seat Cover: A deflector can be inserted into the seat aperture to prevent splashing and can be removed for cleaning. A large seat cover is available for cleaning or when the deflector is removed.
- Armrests: Armrests can be pushed down and clipped securely into the side of the seat. They can be rotated to support the elbows, swap positions (right and left), and rotate the four armrest slots facing in. Armrests for the small seat and those for the large seat are not interchangeable.
- Hip Strap and Hip Strap Clips: A hip strap provides additional support and can be easily removed and reinserted.
- Frame: The frame has several slots to adjust the height of the seat and footboard. The seat assembly slides into one set of slots and is latched in place.
- Casters: Corrosion-proof casters with a depressing lever allow for easy movement and locking of the system.
- Mounting Bar: An optional mounting bar can be attached permanently to the toilet for stability when the system is used over a toilet.
- Backs (High and Low): The system offers both high and low back options, each with two chest straps. The back can be attached horizontally using hook and loop fasteners and triggers, and the blue cover can be removed for cleaning. The back pivots into one of two sets of holes in the seat.
- Adjusting the Back Angle: Two triggers allow for adjustment of the back angle to three tilt positions: 5° and 15° backward, and 5° forward.
- Seat Pivot Block (Large Seat Only): The seat pivot block allows for positioning the back in the front holes or the rear holes, raising the back into position.
- Anterior Support: The anterior support attaches to the armrests of the toilet seat and has four positions for the latches to engage in. The latch handle is used to pull the front of the anterior support to release it.
- Footboard: The footboard slides into the bottom slots of the frame and has latches for adjustment. It can be pushed forward or pulled out. Footboard straps are available for foot positioning.
- Abductor and Pan: An abductor can be slid into the guides beneath the seat to help position the user. A pan can be slid into the same channels from either the front or back. The pan can only be used on the free-standing frame.
Maintenance Features:
- Durability: The product is designed and tested for an expected life of 5 years, assuming proper use and maintenance. Regular maintenance and inspections are crucial.
- Cleaning: The Rifton Blue Wave toileting system is designed for easy cleaning. All components can be removed and cleaned, or the whole item can be placed under the shower.
- Plastic Parts: Can be cleaned using detergent, toilet cleaner, or bleach and warm water. Do not boil or autoclave.
- Casters: Can be cleaned by spraying from underneath with a high-pressure water hose. Avoid using chemicals or lubricants on casters.
- Water Entry: The seat cavity may be tipped out of the pivot holes to remove water.
- Deflector: Distortion of the shape of the deflector can be corrected by immersing it in very hot (not boiling) water.
- Standard Fabric: Parts may be washed and dried at a warm setting. Use mild detergents or disinfectants.
- Soft Fabric: Parts may be machine washed at 100° F (40°C). Tumble dry at low heat.
- Hook and Loop: Engage hook and loop before washing. Do not iron.
- Inspection: Regularly inspect the toilet, seat bolts, and nuts when using the mounting bar.
- Replacement Parts: Rifton components and products are available for purchase. Order information for replacement parts is provided on the back of the product manual.
- Materials:
- Steel hardware items (nuts, bolts, screws, etc.) are typically zinc or nickel plated, or stainless steel.
- Upholstery items (pads, support blocks, padded prompts, etc.) are typically fire-retardant polyurethane foam with a fire-retardant cover made from expanded vinyl.
- Frames are typically steel or aluminum tubing, welded together, and coated with a baked-on paint finish. Some frame components may also be stainless steel.
- Tires are tubeless, filled with polyurethane foam and do not require inflation.
- Straps are typically made of polypropylene or nylon webbing.
- Wooden components are typically birch plywood, solid maple, or laminated hardwood veneers, finished with a clear polyurethane lacquer.
- Tabletops are typically high-pressure laminate (Formica).
- Plastic components are typically injection molded from a variety of industrial resins.
- All materials are latex, lead, and phthalates free.
Need help?
General
To Next Page
