What to do if there is a serial number mismatch on my Rigaku Measuring Instruments?
If the serial numbers on your Rigaku Measuring Instruments do not match, contact Rigaku Analytical Devices or your local Rigaku representative.
General| Brand | Rigaku |
|---|---|
| Model | KT-100 |
| Category | Measuring Instruments |
| Language | English |
Overview of the manual's content, audience, and structure.
Explains symbols and text formatting used in the manual.
Crucial safety and compliance information for operating the analyzer.
Contact information for support and assistance.
Introduces the analyzer, its capabilities, and package contents.
Details of the top, front left, and front right views of the analyzer.
Identifies power/USB connectors and lists included accessories.
Instructions for safely transporting the analyzer and its components using the case.
Explains the Laser Induced Breakdown Spectroscopy technology used by the analyzer.
Describes what the KT-100 analyzer can do and the types of alloys it can identify.
Step-by-step guide for battery installation and removal from the analyzer.
Instructions for charging batteries using the docking station or AC adapter.
Procedures for turning the analyzer on and off using different methods.
Covers logging in, entering passcodes, and correcting incorrect entries.
Details on reviewing and accepting the laser warning safety prompt.
Explains the use of the touchscreen and physical keypad for operation.
Navigating the main menu and securely logging out of the analyzer.
How to perform a system self-test to verify calibration accuracy.
Guides on cleaning and preparing samples for analysis.
Instructions for properly aligning the sample with the analyzer window.
Step-by-step process for performing an analysis on a sample.
Explains how to use the feature to analyze samples with surface contamination.
How to add data like Sample ID, Lot, PO, and Vendor to results.
Covers selecting views, browsing, and filtering stored analysis results.
Procedures for cleaning the analyzer window to maintain performance.
Configuration and use of Wifi, USB, and Bluetooth for data transfer.
How to navigate to the analyzer's settings menu for customization.
Adjusting how results are displayed, named, and formatted.
Configuring date, time, language, and quick launch keys for optimal operation.
How to establish USB or WiFi connections for data transfer.
Accessing and viewing analysis results through a web browser interface.
Procedures for backing up analysis results to a PC or network.
How to access and interpret runtime status and diagnostic information.
Steps to match the serial number in the software with the hardware label.
Details on the analyzer's optical components and spectral range.
Dimensions, weight, and hardware details of the KT-100 analyzer.
Information on software, data processing, and operating/storage conditions.
Details on the internal battery, battery life, and power requirements.
Explains IP rating for resistance and lists standards for safety and emissions.
Compliance statements for North American and export regulations.
Compliance statements for EU directives and recycling regulations.
To Next Page
