RIGOL
Service Guide for DM3000 Series
RIGOL DM3000 Series Digital Multimeter is equipment designed for high-precision,
multifunction, automation measurements. The series includes 6½ digits multimeter,
with high-speed data acquisition, automatic measurements, multiplexer, mathematical
operations, and flexible user sensor configurations etc.
DM3000 has a high-resolution monochrome LCD display system for simple waveform
display and record. The concise and user-friendly layout of the front panel has a
keyboard, and back lighted functional buttons, embedded with operating instructions
makes the instrument more flexible, and capable. Interface includes RS-232, USB,
LAN, and GPIB for disk storage and print. It supports virtual terminal display and
control, and remote network access.
With the performance and characteristics given below, you will understand how
DM3000 can satisfy your measurement requirements.
Resolving Resolution: > 6½ digits and 2,400,000 Count;
50kSa/s data sampling rate can be used, such as the rapidly changing
high-precision audio waveform data. Meanwhile waveform can be displayed on
LCD Screen;
24 measurement functions
DC voltage and current, AC voltage and current, two-wire and four-wire
resistance, capacitance, continuity test, diode test, frequency, cycle, ratio
measurements, sensor measurement, and so on;
Math include: maximum, minimum, limit, average, dBm, dB;
Data acquisition functions include: data records, inspection, and automatic
measurement;
True RMS AC voltage and current measurement;
16-Channels multiplexer functional measurement and control software (optional);
DC voltage >10GΩ input impedance to achieve the range of 48V (± 24V);
10 groups measuring set-up storage and unlimited setup through PC interface;
256 x 64 pixel monochrome LCD;
I/O: RS-232, USB, LAN and GPIB;
Built-in USB Host to support USB disk and USB printer;
Simple, convenient and flexible control software: Ultralogger and Ultrasensor.
To Next Page
Loading...
