RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
Figure 2- 77
Press Save, to input a filename so it can be reviewed in the future.
Figure 2- 78
Press Done, when completed.
Figure 2- 79
If data saving is not required, press Apply in figure 2-76 to scan and measure.
Figure 2- 80
Operation hint：
1． The system will exit the scanning function after the task(s) is over and return the
function interface.
2． Press and hold for more than 2 seconds to stop.
To Next Page
Loading...
