RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
Run the Scan Result
Press Run in figure 2-68 to startup the current scan task and measure.
View the Scan Result
To view the scan result, the PC software Ultralogger has to be connected. Please
connect the USB Device on the rear panel of DM3000 with the USB interface on the
computer using the USB data cable we provide. See as follow:
Figure 2- 83
Connection between DM3000 and computer
Run the Ultralogger software that has already installed in your computer and operate
according to the description of the online help to get the measured results.
To Next Page
Loading...
