Rigol DM3051 - Page 127

RIGOL
© 2007 RIGOL Technologies, Inc.
User‟s Guide for DM3000 Series
3-13
Figure 3- 23
It allows deleting and editing the reference values that had been entered, select the
group of reference value then press Del or Edit to perform the operations required.
When you finish inputting all the data, press and save all the changes, back to a
higher level menu.
(6). Press  Done  Apply, save all the data into the local storage, and
applies it immediately.
Figure 3- 24
(7). According to the sensor type, select an appropriate connection method.
a) Voltage, resistance, frequency sensor:
Figure 3- 25
Sensor